Adams Rite - MS1848 - Deadlock/Deadlatch - Aluminum - Metal Door
Adams Rite - MS1848 - Deadlock/Deadlatch - Aluminum - Metal Door
Adams Rite
Couldn't load pickup availability
SLK-ADR-MS1848-02-603
Item Number: 7001
The MS1848 Deadlock/Latch for ultra-narrow stile sliding
doors features a self-protecting bolt with adjustable bolt projection. It also has a compact lock designed to fit within very narrow sliding door stiles without
compromising the high degree of security these doors need. The sturdy stainless
steel bolt has two important features not usually found in sliding door hardware.
First, it is adjustable: a full 3/16" lengthening or shortening of bolt projection is
possible by turning an exposed screw in the face of the lock. This can compensate
for considerable misalignment between door and jamb. Second, the MS1848
bolt is self-protecting: if the door is closed with the bolt in the locked position, the
bolt will retract immediately on contact with the jamb, thus preventing damage or
accidental lock-out.
More Details Below
| Face | Rectangular or full radiused ends (see table on the back for dash numbers) |
| Case | Measures 1/2" x 3-3/16" x 1-1/8". Zinc-plated steel |
| Bolt: Hookokbolt: |
Three-ply laminated stainless steel. Designed to withstand approximately one-half ton-force, either horizontal or vertical. Anti-lift bolt stops both door-from-jamb pry bar attacks and attempts to lift the door from its track |
| Standard Package | Case-packed with machine screws for mounting. Shipping weight: 1/3 lb. |
Installation Instructions Download Here
Operation:
360° turn of key or thumb turn throws or retracts the
counterbalanced bolt. The Key can be removed only when the bolt is
in a positively locked or unlocked position. Lock accepts any
standard 1-5/32” diameter mortise cylinder or thumb turn from
either or both sides. The cylinder must have MS® dimensioned
