Skip to product information
1 of 7

Stand Alone Access Controller - HID Prox Card Reader & Keypad Controller - Single or Double Doors - Waterproof IP68

Stand Alone Access Controller - HID Prox Card Reader & Keypad Controller - Single or Double Doors - Waterproof IP68

Deguard

Regular price $99.77 USD
Regular price $119.71 USD Sale price $99.77 USD
Sale Sold out
Shipping calculated at checkout.

SLK-DAC-KP002
Item number: 7885

The Stand Alone Access Controller - HID Prox Card Reader & Keypad Controller  is made with 2 relays for controlling up to to 2 doors   It is suitable for mounting either indoor or outdoor environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy with an internal tamper alarm.  This outdoor / indoor waterprooof keypad is built with ease of installation and ease of use in mind. Using a HID proximity card or pin code or a combination of both for access. Fully programmable for up to 2000 users. It can control the Lock , a Security Alarm, Door Bell Alarm, and also can connect with Exit Buttons and Door Contacts.

There are 7 working modes:

  • Wiegand Reader.
  • Standalone for single door.
  • Standalone for two doors.
  • With external reader for two doors.
  • Two units interlocked for two doors.
  • Anti-passback for single door.
  • Anti-passback for two door.
  • One Master code
  • Two Manager cards

 


Specifications:

Application Outdoor / Indoor 
Input Voltage AC/DC 12V
User Capacity

2000 users

Can be controlled by Prox Card, PIN Code or Combination of Prox Card and PIN

Programmable Easily programmable at the lock
Tamper Alarm Built in light dependent resistor (LDR) for anti tamper
Alarm Built in buzzer
Keyboard back-lit for night accessibility , the back light can be set to Normal ON, Normal OFF or
Human-Approach ON.
Card Reading Distance 3-6 cm
Idle Current <25mA
Lock Output Load <1A
Alarm Output Load <1A
Ring bell load <1A
Card reading distance  40mm Max
Card Frequency:  125KHz for EM and HID
Card transmission format  26-37 bit wiegand
Keypad transmission format 4bit, 8bit and Virtual card number
Card type

EM and HID 

Enclosure material Strong Zinc Alloy Electroplated anti-vandal case
Operating Temperature -49°~131° F ( -45°C~55° C)
Operating Humidity 10%~95% non-condensing
Environment Conforms to IP68 Waterproof Standards 

 

Downloads

Complete Installation, Wiring and Programming Instructions

 

View full details