SIEVEKING - Hollow Metal Door Mortiser tool - Squeeze Play

SLK-SVK-SP-HMDM
Item Number: XXXX

The Squeeze-Play Hollow Metal Door Mortiser allows the locksmith to "form" a perfect square mortise in a steel door without cutting or using internal bridges. Simply insert the tool into the door and tighten the bolt to form the mortise. Squeeze-Play automatically locates and center punches the locations of the bolt mounting screws.

Hardened steel construction, grade 5 bolt, quality thrust bearing, and black oxide coated for rust resistance.

Squeeze-Play cuts installation time by 2/3 while preserving the structural integrity of the door. Never use a "drive-in" bolt again. Demand the Squeeze-Play, accept no substitute. Nothing works like the original. Manufactured by SPC for over 35 years.

More Information Below:

The Squeeze-Play tool creates a "perfect" square mortise at the edge of the steel door. The mortise will accommodate 2 1/4" x 1" and 2 1/4" x 1 1/8" square face bolts for deadbolts and cylindrical lockset latch bolts. The mortise is "formed" into the edge of the door. There is no cutting or loss of structural integrity of the door. The Squeeze-Play™ mortise tool has markers, which mark the locations for the attachment screws. Simply drill and tap the steel door for the two 8-32 screws and install the bolt. This is the fastest and easiest way to install an auxiliary lock in a hollow steel door. Squeeze-Play™ will work on edge seamed doors but will not work for "center" seamed doors.